label-templates/label-item.typ

#set text(
  font: "Inter",
  fallback: false,
  size: 11pt,
  lang: "en",
)

// for DK-11208 (address label)
#set page(
  width: 38mm,
  height: 90mm,
  flipped: false,
  // Because, for this document, our printer setup - a Brother P-touch QL-500
  // label printer driven by a CUPS with the printer-driver-ptouch - and
  // DK-11208 Large Address Labels (38x90mm), either the printer driver or the
  // printer itself doesn't properly print on the labels, we need to deploy some
  // workarounds using margins.
  // Link to the printer-driver-ptouch:
  // https://github.com/philpem/printer-driver-ptouch
  //
  // For the horizontal margins, we use a 4mm margin on the left and a 0mm
  // margin on the right.
  // Do this because by default the print itself is offset to the left sadly. It
  // seems like the printer is printing from the very edge, where the label
  // roll, but not the label itself, is. On the label roll on the left there are
  // 2mm of material until the label itself starts, so we need to offset by 2mm
  // on the left for the print to be on the label itself. However this offset
  // also results in a forced margin of 2mm on the right, so to have an even
  // margin on the resulting label, add another 2mm of margin on the left,
  // resulting in 4mm of margin on the left in total. Also just don't have any
  // margin on the right, since there's a forced margin already anyway.
  //
  // For the vertical margins, we use a 0mm top margin and a 9mm + 9pt bottom
  // margin.
  // Do this because the printer doesn't print from the very top of the label
  // sadly, so since we then have a forced margin there anyway (one of 6mm), we
  // don't need to add any top margin.
  // On the bottom, we already need a margin of 9pt for the image to be fully on
  // the page. However, because the printer doesn't start at the very top, the
  // printing ends after the label already ended. To combat this, add a margin
  // of 7mm for the logo to still be on the page and add another 2mm for the
  // margin to be same as the margin at the sides (resulting in 9mm).
  //
  // These workarounds were developed for this document, our Brother P-touch
  // QL-500 label printer in combination with DK-11208 Large Address Labels
  // (38x90mm).
  margin: (left: 4mm, right: 0mm, top: 0mm, bottom: 9mm + 9pt),
  footer-descent: 0%,
  footer: [
    #set text(size: 8pt)
    #set align(end)
    #image("assets/ccchh.svg", height: 9pt, alt: "CCCHH")
  ]
)

#import "@preview/cades:0.3.0": qr-code

#let item(itemname, itemslug, usage) = [
  == #itemname
  #qr-code("https://wiki.hamburg.ccc.de/item:" + itemslug)
  #text(8pt)[wiki.hamburg.ccc.de/item:#itemslug]
  === Usage
  #usage
]

#item(
  "Prusa i3 MK3s",
  "prusa-i3",
  // "Introduction required"
  "See instructions (in the wiki)"
  // "Freely"
)