scad/c3cat-bottle-clip/c3cat-bottle-clip.scad

/**
 * A name tag that can easily be clipped to the neck of your bottle.
 * Copyright (C) 2013 Roland Hieber <rohieb+bottleclip@rohieb.name>
 *
 * This file was modified by obelix <christian@loelkes.com> for the
 * OHM2013-Logo. If you wish to use other logos please use the original
 * file. All other parameters were not modified.
 *
 * This file was modified again by djerun to use the catars printed
 * by c3cat: https://www.printables.com/model/35076-cat-ears
 *  as the logo and optionally allow use the easrs from
 * https://www.thingiverse.com/thing:5029374
 * printed at scale 0.2 as glue-ins for additional ears.
 *
 * `Ohren_4.stl` and `catears.stl` need to be placed in `../stls/`
 * for the symlinks to work otherwise `catears.stl` needs to be placed
 * at `./catears.stl` and `Ohren_4.stl` at `./catear.stl`.
 *
 * Version of the modification: 1.0
 *
 * See examples.scad for examples on how to use this module.
 *
 * The contents of this file are licenced under CC-BY-SA 3.0 Unported.
 * See https://creativecommons.org/licenses/by-sa/3.0/deed for the
 * licensing terms.
 */

include <write/Write.scad>
use <catear_headband.scad>

$fn = 360;

NAME = "c3cat";
LOGO_FILE = ""; // empty string is catear model
RENDER_COLOR_ONE = true;
RENDER_COLOR_TWO = true;
RENDER_COLOR_THREE = true;
USE_TINY_EARS = true;

/**
 * Creates one instance of a bottle clip name tag. The default values are
 * suitable for 0.5l Club Mate bottles (and similar bottles). By default, logo
 * and text are placed on the name tag so they both share half the height. In this
 * version the logo is fixed.
 *
 * Parameters:
 * ru: the radius on the upper side of the clip
 * rl: the radius on the lower side of the clip
 * ht: the height of the clip
 * width: the thickness of the wall. Values near 2.5 usually result in a good
 *	clippiness for PLA prints.
 * name: the name that is printed on your name tag. For the default ru/rt/ht
 *	values, this string should not exceed 18 characters to fit on the name tag.
 * font: the path to a font for Write.scad.
 */

/**
 * currently openscad fails to render the original `Ohren_4.stl` outside of the preview mode
 * according to [the wiki](https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/FAQ#Why_is_my_imported_STL_file_appearing_with_F5_but_not_F6?) this is the stls fault
 * using meshlab to run `Filters` -> `Cleaning and Repairing` -> `Remove T-Vertices` by `Edge-Flip` with `Ratio` of `1000000` before importing the stl works but but two errors remain.
 */
scale([0.2, 0.2, 0.2]) {
  difference() {
    scale([5, 5, 5]) rotate(45, [0, 0, 1]) bottle_clip(name=NAME);
    translate([ 15*5, 0*5, 18*5]) rotate(80, [0, 1, 0]) catear();
    translate([-15*5, 0*5, 18*5]) rotate(-80, [0, 1, 0]) catear();
  }
  if (RENDER_COLOR_TWO) {
    color("orange")
      translate([ 15*5, 0*5, 18*5])
        rotate(80, [0, 1, 0])
          catear();
  }
  if (RENDER_COLOR_THREE) {
    color("yellow")
      translate([-15*5, 0*5, 18*5])
        rotate(-80, [0, 1, 0])
          catear();
  }
}

module name(name, font, rl, ht, ru) {
  writecylinder(
    text=name,
    where=[0,0,0],
    radius=rl+0.5,
    height=ht/13*7,
    h=ht/13*4,
    t=max(rl,ru),
    font=font);
}

module logo(logo, rl, ht, ru, width) {
  echo("logo: ", logo);
  if(logo == "") {
    ear_size=ht;
    echo("ht: ", ht);
    echo("ru: ", ru);
    echo("rl: ", rl);
    echo("width: ", width);
    translate([0,-max(ru,rl),ht*3/4+.5])
      rotate([90,0,0])
        scale([1,1,1])
          scale([ht/100,ht/100,1])
            translate([0, -ht/2,0])
              rotate(-90, [0, 0, 1])
                catear_headband(
                  size=ear_size,
                  height=max(ru,rl),
                  thickness=width,
                  stretch_len=0,
                  tip_len=0,
                  details=false,
                  with_rake=false
                );
  } else {
        // The logo has been split in 3 parts. // well was... TODO
/*
          rotate([0,0,-48]) translate([0,0,ht*3/4-0.1])
            rotate([90,0,0])
              scale([0.9,0.9,1])
                scale([ht/100,ht/100,1])
                  translate([-25,-29,0.5])
                    linear_extrude(height=max(ru,rl)*2)
                      import("logo_1.dxf");
*/
          translate([0,0,ht*3/4-0.1])
            rotate([90,0,0])
              scale([0.8,0.8,1])
                scale([ht/100,ht/100,1])
                  translate([-18,-22,0.5])
                    linear_extrude(height=max(ru,rl)*2)
                      import(logo);
/*
          rotate([0,0,44]) translate([0,0,ht*3/4-0.1])
            rotate([90,0,0])
              scale([0.7,0.7,1])
                scale([ht/100,ht/100,1])
                  translate([-25,-26,0.5])
                    linear_extrude(height=max(ru,rl)*2)
                      import("logo_3.dxf");
*/
  }
}

module bottle_clip(ru=13, rl=17.5, ht=26, width=2.5, name="c3cat", font="write/orbitron.dxf", logo="") {
	e=100;  // should be big enough, used for the outer boundary of the text/logo
  rotate([0,0,-45]) {
    // main cylinder
    if (RENDER_COLOR_ONE) {
      color("black") difference() {
        cylinder(r1=rl+width, r2=ru+width, h=ht);
        difference() {
          union() {
            name(name=name, font=font, rl=rl, ht=ht, ru=ru);
            logo(logo=logo, rl=rl, ht=ht, ru=ru, width=width);
          }
          cylinder(r1=rl+width/2, r2=ru+width/2, h=ht);
        }
        translate([0,0,-1])
          cylinder(r1=rl, r2=ru, h=ht+2);
        // finally, substract a cube as a gap so we can clip it to the bottle
        rotate([0, 0, 45])
          translate([0,0,-1])
            cube([50,50,50]);
      }
    }
    // text
    if (RENDER_COLOR_TWO) {
      color("orange") difference() {
        name(name=name, font=font, rl=rl, ht=ht, ru=ru);
        cylinder(r1=rl+width/2, r2=ru+width/2, h=ht);
        outer_cutoff(rl, e, ru, ht, width);
      }
    }
    // logo
    if (RENDER_COLOR_THREE) {
      color("yellow") difference() {
        logo(logo=logo, rl=rl, ht=ht, ru=ru, width=2*width);
        cylinder(r1=rl+width/2, r2=ru+width/2, h=ht);
        outer_cutoff(rl, e, ru, ht, width);
      }
    }
  }
}

module outer_cutoff(rl, e, ru, ht, width) {
    // outer cylinder which is substracted, so the text and the logo end
    // somewhere on the outside ;-)
    difference () {
      cylinder(r1=rl+e, r2=ru+e, h=ht);
      translate([0,0,-1])
        // Note: bottom edges of characters are hard to print when character
        // depth is > 0.7
        cylinder(r1=rl+width+0.7, r2=ru+width+0.7, h=ht+2);
    }
}

module catear() {
  if (USE_TINY_EARS) {
      rotate(-90, [0, 0, 1]) union() {
      scale([1,  1 ,1]) translate([0, -85]) import("catear.stl");
      scale([1, -1, 1]) translate([0, -85]) import("catear.stl");
    }
  }
}

/**
 * Creates one instance of a bottle clip name tag suitable for 0.33l longneck
 * bottles (like fritz cola, etc.). All parameters are passed to the module
 * bottle_clip(), see there for their documentation.
 */
module bottle_clip_longneck(name="c3cat", width=2.5, font="write/orbitron.dxf") {
  bottle_clip(name=name, ru=13, rl=15, ht=26, width=width, font=font, logo="");
}

/**
 * The Steinie-Tag has been removed since it does not support logos.
**/