[WIP] fs-cover.scad

c3cat-bottle-clip/c3cat-bottle-clip.scad

@@ -150,8 +150,13 @@ module bottle_clip(ru=13, rl=17.5, ht=26, width=2.5, name="c3cat", font="write/o
     if (RENDER_COLOR_ONE) {
       color("black") difference() {
         cylinder(r1=rl+width, r2=ru+width, h=ht);
-          name(name=name, font=font, rl=rl, ht=ht, ru=ru);
-          logo(logo=logo, rl=rl, ht=ht, ru=ru, width=width);
+        difference() {
+          union() {
+            name(name=name, font=font, rl=rl, ht=ht, ru=ru);
+            logo(logo=logo, rl=rl, ht=ht, ru=ru, width=width);
+          }
+          cylinder(r1=rl+width/2, r2=ru+width/2, h=ht);
+        }
         translate([0,0,-1])
           cylinder(r1=rl, r2=ru, h=ht+2);
         // finally, substract a cube as a gap so we can clip it to the bottle
@@ -164,7 +169,7 @@ module bottle_clip(ru=13, rl=17.5, ht=26, width=2.5, name="c3cat", font="write/o
     if (RENDER_COLOR_TWO) {
       color("orange") difference() {
         name(name=name, font=font, rl=rl, ht=ht, ru=ru);
-        cylinder(r1=rl+width, r2=ru+width, h=ht);
+        cylinder(r1=rl+width/2, r2=ru+width/2, h=ht);
         outer_cutoff(rl, e, ru, ht, width);
       }
     }
@@ -172,7 +177,7 @@ module bottle_clip(ru=13, rl=17.5, ht=26, width=2.5, name="c3cat", font="write/o
     if (RENDER_COLOR_THREE) {
       color("yellow") difference() {
         logo(logo=logo, rl=rl, ht=ht, ru=ru, width=2*width);
-        cylinder(r1=rl+width, r2=ru+width, h=ht);
+        cylinder(r1=rl+width/2, r2=ru+width/2, h=ht);
         outer_cutoff(rl, e, ru, ht, width);
       }
     }

fs-cover-cat.scad

@@ -1,15 +1,15 @@
 /**
  * This requires
  * https://files.printables.com/media/prints/451501/stls/4205518_58958bba-4c36-4995-b4e7-da5abd1ba821/loveboard-cover-r2.stl
- * 
+ *
  * to be placed under `./stls/LoveBoard-cover-R2.stl` in order to work
  * but it needs a run in meshlabs uniform fcae orientation filter for
  * openscad to be happy with it
- * 
+ *
  * if rendering is missing the ear infill, `Design` > `Flush Caches`
  * may be required.
  */
- 
+
 include <headband.scad>
 use <catear_headband.scad>
 
@@ -34,7 +34,7 @@ module fs_cover() {
   rotate(180, [0, 0, 1])
     translate([0, 0, 17])
       rotate(90, [1, 0, 0])
-        import("stls/fs-cover.stl");  
+        import("stls/fs-cover.stl");
 }
 
 module fs_cover_cat() {
@@ -43,7 +43,7 @@ module fs_cover_cat() {
     difference() {
       union() {
         for (i=[-1,1])
-          scale([i, 1, 1]) 
+          scale([i, 1, 1])
             translate([-13, 4, 5.5])
               rotate(-80) {
                 union() catear(
@@ -88,4 +88,4 @@ module fs_cover_cat() {
   }
 }
 
-fs_cover_cat();
+fs_cover_cat();