[WIP] pressfit_headband.scad

c3cat-bottle-clip/c3cat-bottle-clip.scad

@@ -25,6 +25,13 @@
  * licensing terms.
  */
 
+NAME = "c3cat";
+RENDER_COLOR_1 = true; // used for clip body
+RENDER_COLOR_2 = true; // used for logo and one small ear
+RENDER_COLOR_3 = true; // used for name and other small ear
+SMALL_EARS = true;
+$fn=360;
+
 include <write/Write.scad>
 
 /**
@@ -51,13 +58,17 @@ include <write/Write.scad>
  */
 scale([0.2, 0.2, 0.2]) {
   difference() {
-    scale([5, 5, 5]) rotate(45, [0, 0, 1]) bottle_clip(name="c3cat");
+    scale([5, 5, 5]) rotate(45, [0, 0, 1]) bottle_clip(name=NAME);
-    translate([ 15*5, 0*5, 18*5]) rotate(80, [0, 1, 0]) catear();
+    if (SMALL_EARS) {
-    translate([-15*5, 0*5, 18*5]) rotate(-80, [0, 1, 0]) catear();
+      translate([ 15*5, 0*5, 18*5]) rotate(80, [0, 1, 0]) catear();
+      translate([-15*5, 0*5, 18*5]) rotate(-80, [0, 1, 0]) catear();
+    }
   }
 
-  translate([0,  5*5, 0]) catear();
+  if (SMALL_EARS) {
-  rotate(180) translate([0,  5*5, 0]) catear();
+    if (RENDER_COLOR_2) {translate([0,  5*5, 0]) catear();}
+    if (RENDER_COLOR_3) {rotate(180) translate([0,  5*5, 0]) catear();}
+  }
 }
 
 module bottle_clip(ru=13, rl=17.5, ht=26, width=2.5, name="c3cat", font="write/orbitron.dxf", logo="") {
@@ -67,45 +78,65 @@ module bottle_clip(ru=13, rl=17.5, ht=26, width=2.5, name="c3cat", font="write/o
   difference() {
     rotate([0,0,-45]) union() {
       // main cylinder
-      cylinder(r1=rl+width, r2=ru+width, h=ht);
+      if (RENDER_COLOR_1) {cylinder(r1=rl+width, r2=ru+width, h=ht);}
       // text and logo
       if(logo == "") {
-        color("orange") writecylinder(name, [0,0,0], rl+0.5, ht/13*7, h=ht/13*4, t=max(rl,ru), font=font);
+        if (RENDER_COLOR_3) {
-        translate([4.7, -rl, ht*1.08]) rotate(-10, [1, 0, 0]) rotate(76, [0, 1, 0]) scale([0.08, 2, 0.08]) color("red") import("catears.stl");
+          color("orange")
+            writecylinder(name, [0,0,0], rl+0.5, ht/13*7, h=ht/13*4, t=max(rl,ru), font=font);
+        }
+        if (RENDER_COLOR_2) {
+          translate([4.7, -rl, ht*1.08])
+            rotate(-10, [1, 0, 0])
+              rotate(76, [0, 1, 0])
+                scale([0.08, 2, 0.08])
+                  color("red")
+                    import("catears.stl");
+        }
       } else {
-        color("orange") writecylinder(name, [0,0,0], rl+0.5, ht/13*7, h=ht/13*4, t=max(rl,ru), font=font);
+        if (RENDER_COLOR_3) {
+          color("orange")
+            writecylinder(name, [0,0,0], rl+0.5, ht/13*7, h=ht/13*4, t=max(rl,ru), font=font);
+        }
 
-        // The logo has been split in 3 parts.
+        if (RENDER_COLOR_2) {
+          // The logo has been split in 3 parts. // well the ohm one was ...
 /*
-        rotate([0,0,-48]) translate([0,0,ht*3/4-0.1])
+          rotate([0,0,-48]) translate([0,0,ht*3/4-0.1])
-          rotate([90,0,0])
+            rotate([90,0,0])
-            scale([0.9,0.9,1])
+              scale([0.9,0.9,1])
-              scale([ht/100,ht/100,1])
+                scale([ht/100,ht/100,1])
-                translate([-25,-29,0.5])
+                  translate([-25,-29,0.5])
-                  linear_extrude(height=max(ru,rl)*2)
+                    linear_extrude(height=max(ru,rl)*2)
-                    import("logo_1.dxf");
+                      import("logo_1.dxf");
 */
-        translate([0,0,ht*3/4-0.1])
+          translate([0,0,ht*3/4-0.1])
-          rotate([90,0,0])
+            rotate([90,0,0])
-            scale([0.8,0.8,1])
+              scale([0.8,0.8,1])
-              scale([ht/100,ht/100,1])
+                scale([ht/100,ht/100,1])
-                translate([-18,-22,0.5])
+                  translate([-18,-22,0.5])
-                  linear_extrude(height=max(ru,rl)*2)
+                    linear_extrude(height=max(ru,rl)*2)
-                    import(logo);
+                      import(logo);
 /*
-        rotate([0,0,44]) translate([0,0,ht*3/4-0.1])
+          rotate([0,0,44]) translate([0,0,ht*3/4-0.1])
-          rotate([90,0,0])
+            rotate([90,0,0])
-            scale([0.7,0.7,1])
+              scale([0.7,0.7,1])
-              scale([ht/100,ht/100,1])
+                scale([ht/100,ht/100,1])
-                translate([-25,-26,0.5])
+                  translate([-25,-26,0.5])
-                  linear_extrude(height=max(ru,rl)*2)
+                    linear_extrude(height=max(ru,rl)*2)
-                    import("logo_3.dxf");
+                      import("logo_3.dxf");
 */
+        }
       }
     }
-    // inner cylinder which is substracted
+    if (RENDER_COLOR_1) {
-    translate([0,0,-1])
+      // inner cylinder which is substracted
-      cylinder(r1=rl, r2=ru, h=ht+2);
+      translate([0,0,-1])
+        cylinder(r1=rl, r2=ru, h=ht+2);
+    } else {
+      // main cylinder which is subtracted when not rendering color 1
+      cylinder(r1=rl+width, r2=ru+width, h=ht);
+    }
     // outer cylinder which is substracted, so the text and the logo end
     // somewhere on the outside ;-)
     difference () {

globals.scad

@@ -12,7 +12,7 @@ RAKE_WIDTH=1;
 RAKE_STRETCH=1;
 RAKE_CHAMFER=0.5;
 CHAMFER=1;
-CHAMFER_SHAPE="curve";
+CHAMFER_SHAPE="cone";
 
 INSERTICLE_X = 4.6;
 INSERTICLE_Y = 7.4;

pressfit_headband.scad

@@ -2,32 +2,69 @@ include <globals.scad>
 
 use <headband.scad>
 
+RENDER_PLA = true;
+RENDER_PETG = true;
+
 module inserticle() {
-    cube([INSERTICLE_X, INSERTICLE_Y, INSERTICLE_Z], center=true);
+  cube([INSERTICLE_X, INSERTICLE_Y, INSERTICLE_Z], center=true);
 }
 
-module pressfit_headband(debug=DEBUG, size=SIZE, height=HEIGHT, thickness=THICKNESS, part=PART, stretch_len=STRETCH_LEN, tip_len=TIP_LEN, tip_bend=TIP_BEND) {
+module anchored_inserticle() {
-    union() {
+  translate([-1, 0, 0]) rotate(90, [0, 1, 0]) inserticle();
-        color("pink") { $a=48;
+  rotate(90, [0, 1, 0]) {
-            rotate( $a, [0, 0, 1]) {
+    cube([INSERTICLE_X-2*CHAMFER, INSERTICLE_Y, INSERTICLE_Z], center=true);
-                translate([-size-4, 0,]) rotate(90, [0, 1, 0]) inserticle();
+    translate([0, 0, INSERTICLE_Z/2+0.5])
-                translate([-size-3, 0,]) rotate(90, [0, 1, 0]) inserticle();
+      cube([INSERTICLE_X/2, INSERTICLE_Y+2, 1], center=true);
-            }
+  }
-            rotate(-$a, [0, 0, 1]) {
+}
-                translate([-size-4, 0,]) rotate(90, [0, 1, 0]) inserticle();
+
-                translate([-size-3, 0,]) rotate(90, [0, 1, 0]) inserticle();
+module pla_parts(size, a) {
-            }
+  color("pink") {
+    for (i=[-1, 1]) {
+      union() {
+        rotate(i*a, [0, 0, 1]) {
+          translate([-size-3, 0, 0]) anchored_inserticle();
+//          translate([-size-4, 0,]) rotate(90, [0, 1, 0]) inserticle();
+//          translate([-size-3, 0,]) rotate(90, [0, 1, 0]) {
+//            cube([INSERTICLE_X-2*CHAMFER, INSERTICLE_Y, INSERTICLE_Z], center=true);
+//            translate([0, 0, INSERTICLE_Z/2+0.5])
+//              cube([INSERTICLE_X/2, INSERTICLE_Y+2, 1], center=true);
+//          }
         }
-        headband(
+      }
-            size=size,
+    }
-            height=height,
+  }  
-            thickness=thickness,
+}
-            part=part,
+
-            stretch_len=stretch_len,
+module petg_parts(size, height, thickness, part, stretch_len, tip_len, tip_bend) {
-            tip_len=tip_len,
+  headband(
-            tip_bend=tip_bend
+    size=size,
-        );
+    height=height,
-    };
+    thickness=thickness,
+    part=part,
+    stretch_len=stretch_len,
+    tip_len=tip_len,
+    tip_bend=tip_bend
+  );  
+}
+
+module pressfit_headband(debug=DEBUG, size=SIZE, height=HEIGHT, thickness=THICKNESS, part=PART,  stretch_len=STRETCH_LEN, tip_len=TIP_LEN, tip_bend=TIP_BEND, a=48) {
+  if (RENDER_PLA && RENDER_PETG) {
+    union() {
+      petg_parts(size, height, thickness, part, stretch_len, tip_len, tip_bend);
+      pla_parts(size, a);
+    }
+  } else {
+    if (RENDER_PETG) {
+      difference() {
+        petg_parts(size, height, thickness, part, stretch_len, tip_len, tip_bend);
+        pla_parts(size, a);
+      }
+    }
+    if (RENDER_PLA) {
+      pla_parts(size, a);
+    }
+  }
 }
 
 pressfit_headband();