142 lines
5.4 KiB
OpenSCAD
142 lines
5.4 KiB
OpenSCAD
/**
|
|
* A name tag that can easily be clipped to the neck of your bottle.
|
|
* Copyright (C) 2013 Roland Hieber <rohieb+bottleclip@rohieb.name>
|
|
*
|
|
* This file was modified by obelix <christian@loelkes.com> for the
|
|
* OHM2013-Logo. If you wish to use other logos please use the original
|
|
* file. All other parameters were not modified.
|
|
*
|
|
* This file was modified again by djerun to use the catars printed
|
|
* by c3cat: https://www.printables.com/model/35076-cat-ears
|
|
* as the logo and optionally allow use the easrs from
|
|
* https://www.thingiverse.com/thing:5029374
|
|
* printed at scale 0.2 as glue-ins for additional ears.
|
|
*
|
|
* `Ohren_4.stl` and `catears.stl` need to be placed in `../stls/`
|
|
* for the symlinks to work otherwise `catears.stl` needs to be placed
|
|
* at `./catears.stl` and `Ohren_4.stl` at `./catear.stl`.
|
|
*
|
|
* Version of the modification: 1.0
|
|
*
|
|
* See examples.scad for examples on how to use this module.
|
|
*
|
|
* The contents of this file are licenced under CC-BY-SA 3.0 Unported.
|
|
* See https://creativecommons.org/licenses/by-sa/3.0/deed for the
|
|
* licensing terms.
|
|
*/
|
|
|
|
include <write/Write.scad>
|
|
|
|
/**
|
|
* Creates one instance of a bottle clip name tag. The default values are
|
|
* suitable for 0.5l Club Mate bottles (and similar bottles). By default, logo
|
|
* and text are placed on the name tag so they both share half the height. In this
|
|
* version the logo is fixed.
|
|
*
|
|
* Parameters:
|
|
* ru: the radius on the upper side of the clip
|
|
* rl: the radius on the lower side of the clip
|
|
* ht: the height of the clip
|
|
* width: the thickness of the wall. Values near 2.5 usually result in a good
|
|
* clippiness for PLA prints.
|
|
* name: the name that is printed on your name tag. For the default ru/rt/ht
|
|
* values, this string should not exceed 18 characters to fit on the name tag.
|
|
* font: the path to a font for Write.scad.
|
|
*/
|
|
|
|
/**
|
|
* currently openscad fails to render the original `Ohren_4.stl` outside of the preview mode
|
|
* according to [the wiki](https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/FAQ#Why_is_my_imported_STL_file_appearing_with_F5_but_not_F6?) this is the stls fault
|
|
* using meshlab to run `Filters` -> `Cleaning and Repairing` -> `Remove T-Vertices` by `Edge-Flip` with `Ratio` of `1000000` before importing the stl works but but two errors remain.
|
|
*/
|
|
scale([0.2, 0.2, 0.2]) {
|
|
difference() {
|
|
scale([5, 5, 5]) rotate(45, [0, 0, 1]) bottle_clip(name="c3cat");
|
|
translate([ 15*5, 0*5, 18*5]) rotate(80, [0, 1, 0]) catear();
|
|
translate([-15*5, 0*5, 18*5]) rotate(-80, [0, 1, 0]) catear();
|
|
}
|
|
|
|
translate([0, 5*5, 0]) catear();
|
|
rotate(180) translate([0, 5*5, 0]) catear();
|
|
}
|
|
|
|
module bottle_clip(ru=13, rl=17.5, ht=26, width=2.5, name="c3cat", font="write/orbitron.dxf", logo="") {
|
|
|
|
e=100; // should be big enough, used for the outer boundary of the text/logo
|
|
|
|
difference() {
|
|
rotate([0,0,-45]) union() {
|
|
// main cylinder
|
|
cylinder(r1=rl+width, r2=ru+width, h=ht);
|
|
// text and logo
|
|
if(logo == "") {
|
|
color("orange") writecylinder(name, [0,0,0], rl+0.5, ht/13*7, h=ht/13*4, t=max(rl,ru), font=font);
|
|
translate([4.7, -rl, ht*1.08]) rotate(-10, [1, 0, 0]) rotate(76, [0, 1, 0]) scale([0.08, 2, 0.08]) color("red") import("catears.stl");
|
|
} else {
|
|
color("orange") writecylinder(name, [0,0,0], rl+0.5, ht/13*7, h=ht/13*4, t=max(rl,ru), font=font);
|
|
|
|
// The logo has been split in 3 parts.
|
|
/*
|
|
rotate([0,0,-48]) translate([0,0,ht*3/4-0.1])
|
|
rotate([90,0,0])
|
|
scale([0.9,0.9,1])
|
|
scale([ht/100,ht/100,1])
|
|
translate([-25,-29,0.5])
|
|
linear_extrude(height=max(ru,rl)*2)
|
|
import("logo_1.dxf");
|
|
*/
|
|
translate([0,0,ht*3/4-0.1])
|
|
rotate([90,0,0])
|
|
scale([0.8,0.8,1])
|
|
scale([ht/100,ht/100,1])
|
|
translate([-18,-22,0.5])
|
|
linear_extrude(height=max(ru,rl)*2)
|
|
import(logo);
|
|
/*
|
|
rotate([0,0,44]) translate([0,0,ht*3/4-0.1])
|
|
rotate([90,0,0])
|
|
scale([0.7,0.7,1])
|
|
scale([ht/100,ht/100,1])
|
|
translate([-25,-26,0.5])
|
|
linear_extrude(height=max(ru,rl)*2)
|
|
import("logo_3.dxf");
|
|
*/
|
|
}
|
|
}
|
|
// inner cylinder which is substracted
|
|
translate([0,0,-1])
|
|
cylinder(r1=rl, r2=ru, h=ht+2);
|
|
// outer cylinder which is substracted, so the text and the logo end
|
|
// somewhere on the outside ;-)
|
|
difference () {
|
|
cylinder(r1=rl+e, r2=ru+e, h=ht);
|
|
translate([0,0,-1])
|
|
// Note: bottom edges of characters are hard to print when character
|
|
// depth is > 0.7
|
|
cylinder(r1=rl+width+0.7, r2=ru+width+0.7, h=ht+2);
|
|
}
|
|
// finally, substract a cube as a gap so we can clip it to the bottle
|
|
translate([0,0,-1]) cube([50,50,50]);
|
|
}
|
|
}
|
|
|
|
module catear() {
|
|
rotate(-90, [0, 0, 1]) union() {
|
|
scale([1, 1 ,1]) translate([0, -85]) import("catear.stl");
|
|
scale([1, -1, 1]) translate([0, -85]) import("catear.stl");
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Creates one instance of a bottle clip name tag suitable for 0.33l longneck
|
|
* bottles (like fritz cola, etc.). All parameters are passed to the module
|
|
* bottle_clip(), see there for their documentation.
|
|
*/
|
|
module bottle_clip_longneck(name="c3cat", width=2.5, font="write/orbitron.dxf") {
|
|
bottle_clip(name=name, ru=13, rl=15, ht=26, width=width, font=font, logo="");
|
|
}
|
|
|
|
/**
|
|
* The Steinie-Tag has been removed since it does not support logos.
|
|
**/
|