Case2.0: Add overview

docs/case2.0/index.md

@@ -0,0 +1,36 @@
+---
+title: Overview
+order: 0
+---
+
+![](img/voc-case2_0-pallet.jpeg){ align="right", width="250" }
+The lecture room set 2.0 aka. "Case 2.0" consists of two 120x60 cm [TRANSFlex](https://www.amptown-cases.de/en/product/transflex/) road cases on a standard EUR-pallet.
+
+As the picture shows: When both cases are topped on their short side, they fit perfectly inside the 120x80 cm outline of the pallet.
+The height is approx. 140 cm.
+
+During operation, an area of 2x 120x60cm with a height of approx. 80 cm is needed plus some space to store the pallet somewhere.
+
+The c3voc owns a total of 6 room setups called "Saal 1" to "Saal 6".
+Each case is marked with a unique identifier in the form of `$room.$case`, so e.g. `4.1` and `4.2` make the set for room/ hall 4.
+
+## Content
+The concept of the setup is to use pre-assembled module for things which are usually used together.
+These include the so called Lectern, FOH and Encoder modules and a euro crate containing everything that's associated to the camera position.
+
+### Case x.1
+The `.1` case contains accessories including:
+
+- tripod and camera crate (including preview monitor, power supply, etc.)
+- cable bridges and cable mats
+- power, XLR, SDI and HDMI cables
+- several accessory boxey
+
+### Case x.2
+The `.2` case contains the modules and other equipment:
+
+- lectern, FOH and encoder module
+- office crate
+- minion crate
+- microphones
+- ethernet cables