From 174dca88df21274b07451cb17bfd66eae5cf33a2 Mon Sep 17 00:00:00 2001 From: jtbx Date: Thu, 26 Mar 2026 16:53:34 +0100 Subject: [PATCH] Rename "crate" to "box" --- docs/case2.0/buildup.md | 10 +++++----- docs/case2.0/index.md | 6 +++--- docs/case2.0/packing.md | 8 ++++---- 3 files changed, 12 insertions(+), 12 deletions(-) diff --git a/docs/case2.0/buildup.md b/docs/case2.0/buildup.md index 954c0d3..938ddf2 100644 --- a/docs/case2.0/buildup.md +++ b/docs/case2.0/buildup.md @@ -24,9 +24,9 @@ With these questions in mind, you can start distributing the eqipment. * 1 Schuko to TRUE1 cable * 2 HDMI cables (one for projector, 3m for speaker laptop) * 1 3m Cinch to 3.5mm jack cable - * speaker adapters crate/ bag - * battery charger crate - * microphone crate(s) + * speaker adapters box/ bag + * battery charger box + * microphone boxes - Place the lectern module somewhere convenient on its bottom or side (not on the back b/c of spilled drinks) - Connect to power and projector - Connect HDMI and 3.5mm jack cable and place on lectern @@ -42,7 +42,7 @@ If we're sure that enough helpers are present, the camera can also be placed som - Take the following items to the FOH position: * FOH module * 1 Schuko to TRUE1 cable + schuko extension cord, if needed - * Mixer laptop crate + * Mixer laptop box * Headphones (DT 770) * Encoder module * 1 Schuko to C13 cable (aka "KaltgerÃĪtekabel") @@ -61,7 +61,7 @@ For the camera: - Take the following items to the FOH position: * Tripod - * Camera crate + * Camera box * 1 2m HDMI cable * 1 3-way power strip * 2 XLR cables (long enough to reach FOH module) diff --git a/docs/case2.0/index.md b/docs/case2.0/index.md index c0aee62..5e2596d 100644 --- a/docs/case2.0/index.md +++ b/docs/case2.0/index.md @@ -21,7 +21,7 @@ These include the so called Lectern, FOH and Encoder modules and a euro crate co ### Case x.1 The `.1` case contains accessories including: -- tripod and camera crate (including preview monitor, power supply, etc.) +- tripod and camera box (including preview monitor, power supply, etc.) - cable bridges and cable mats - power, XLR, SDI and HDMI cables - several accessory boxes @@ -32,8 +32,8 @@ The `.1` case contains accessories including: The `.2` case contains the modules and other equipment: - lectern, FOH and encoder module -- office crate -- minion crate +- office box +- minion box - microphones - ethernet cables diff --git a/docs/case2.0/packing.md b/docs/case2.0/packing.md index 558d5c1..19edd1d 100644 --- a/docs/case2.0/packing.md +++ b/docs/case2.0/packing.md @@ -13,10 +13,10 @@ Packing the cases shouldn't be too complicated, but a few details need special a Compartments (from left to right): - **Power cables**: Schuko extension cords, power strips, schuko to TRUE1, schuko to C13, cable mats -- **Accessories (back tower)**: Intercom crate, ethernet crate, audio and DI crate -- **Accessories (front tower)**: Batteries and lucky cat crate, tape crate, embedder and converters crate +- **Accessories (back tower)**: Intercom box, ethernet box, audio and DI box +- **Accessories (front tower)**: Batteries and lucky cat box, tape box, embedder and converters box - **Accessories (sorting box)**: Small adapters box -- **Camera**: Tally crate, Mixer laptop crate, Camera crate +- **Camera**: Tally box, Mixer laptop box, Camera box - **XLR Cables**: Multiple XLR cables and Headphones (in a bag) - **Video Cables**: Multiple SDI and HDMI cables @@ -51,7 +51,7 @@ It's recommended to put the rubber cable mats in the compartment first, then the Compartments (from left to right): - **FOH module** (bottom side to the left) -- **Supplies**: c3lingo (currently only a placeholder) crate, office crate, minion crate, microphones crate +- **Supplies**: c3lingo (currently only a placeholder) box, office box, minion box, microphones box - **ethernet compartment**: Multiple long ethernet cables - **Lectern module** (bottom side to the left) - **Encoder module** (bottom side to the left)