diff --git a/docs/case2.0/buildup.md b/docs/case2.0/buildup.md index 938ddf2..954c0d3 100644 --- a/docs/case2.0/buildup.md +++ b/docs/case2.0/buildup.md @@ -24,9 +24,9 @@ With these questions in mind, you can start distributing the eqipment. * 1 Schuko to TRUE1 cable * 2 HDMI cables (one for projector, 3m for speaker laptop) * 1 3m Cinch to 3.5mm jack cable - * speaker adapters box/ bag - * battery charger box - * microphone boxes + * speaker adapters crate/ bag + * battery charger crate + * microphone crate(s) - Place the lectern module somewhere convenient on its bottom or side (not on the back b/c of spilled drinks) - Connect to power and projector - Connect HDMI and 3.5mm jack cable and place on lectern @@ -42,7 +42,7 @@ If we're sure that enough helpers are present, the camera can also be placed som - Take the following items to the FOH position: * FOH module * 1 Schuko to TRUE1 cable + schuko extension cord, if needed - * Mixer laptop box + * Mixer laptop crate * Headphones (DT 770) * Encoder module * 1 Schuko to C13 cable (aka "KaltgerÃĪtekabel") @@ -61,7 +61,7 @@ For the camera: - Take the following items to the FOH position: * Tripod - * Camera box + * Camera crate * 1 2m HDMI cable * 1 3-way power strip * 2 XLR cables (long enough to reach FOH module) diff --git a/docs/case2.0/img/voc-case2_0-crate-audio.jpg b/docs/case2.0/img/voc-case2_0-crate-audio.jpg deleted file mode 100644 index 1299b88..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-audio.jpg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-crate-batteries.jpg b/docs/case2.0/img/voc-case2_0-crate-batteries.jpg deleted file mode 100644 index d974c1f..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-batteries.jpg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-crate-camera-bottom.jpeg b/docs/case2.0/img/voc-case2_0-crate-camera-bottom.jpeg deleted file mode 100644 index ef260ae..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-camera-bottom.jpeg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-crate-camera-top.jpeg b/docs/case2.0/img/voc-case2_0-crate-camera-top.jpeg deleted file mode 100644 index 80cc79d..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-camera-top.jpeg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-crate-embedder.jpg b/docs/case2.0/img/voc-case2_0-crate-embedder.jpg deleted file mode 100644 index a1f3918..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-embedder.jpg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-crate-intercom.jpg b/docs/case2.0/img/voc-case2_0-crate-intercom.jpg deleted file mode 100644 index d4ff257..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-intercom.jpg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-crate-laptop-bottom.jpeg b/docs/case2.0/img/voc-case2_0-crate-laptop-bottom.jpeg deleted file mode 100644 index b9d97b8..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-laptop-bottom.jpeg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-crate-laptop-top.jpeg b/docs/case2.0/img/voc-case2_0-crate-laptop-top.jpeg deleted file mode 100644 index c482d63..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-laptop-top.jpeg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-crate-network.jpg b/docs/case2.0/img/voc-case2_0-crate-network.jpg deleted file mode 100644 index ed6b652..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-network.jpg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-crate-office.jpg b/docs/case2.0/img/voc-case2_0-crate-office.jpg deleted file mode 100644 index dc21d44..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-office.jpg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-crate-transmitters.jpg b/docs/case2.0/img/voc-case2_0-crate-transmitters.jpg deleted file mode 100644 index b7e017f..0000000 Binary files a/docs/case2.0/img/voc-case2_0-crate-transmitters.jpg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-foh-back.jpeg b/docs/case2.0/img/voc-case2_0-foh-back.jpeg index 7e00e1c..6679c3f 100644 Binary files a/docs/case2.0/img/voc-case2_0-foh-back.jpeg and b/docs/case2.0/img/voc-case2_0-foh-back.jpeg differ diff --git a/docs/case2.0/img/voc-case2_0-foh-front.jpeg b/docs/case2.0/img/voc-case2_0-foh-front.jpeg deleted file mode 100644 index 443c4fe..0000000 Binary files a/docs/case2.0/img/voc-case2_0-foh-front.jpeg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-lectern-back.jpeg b/docs/case2.0/img/voc-case2_0-lectern-back.jpeg deleted file mode 100644 index dacd601..0000000 Binary files a/docs/case2.0/img/voc-case2_0-lectern-back.jpeg and /dev/null differ diff --git a/docs/case2.0/img/voc-case2_0-lectern-front.jpeg b/docs/case2.0/img/voc-case2_0-lectern-front.jpeg deleted file mode 100644 index 29ab352..0000000 Binary files a/docs/case2.0/img/voc-case2_0-lectern-front.jpeg and /dev/null differ diff --git a/docs/case2.0/index.md b/docs/case2.0/index.md index 9a03d11..c0aee62 100644 --- a/docs/case2.0/index.md +++ b/docs/case2.0/index.md @@ -21,7 +21,7 @@ These include the so called Lectern, FOH and Encoder modules and a euro crate co ### Case x.1 The `.1` case contains accessories including: -- tripod and camera box (including preview monitor, power supply, etc.) +- tripod and camera crate (including preview monitor, power supply, etc.) - cable bridges and cable mats - power, XLR, SDI and HDMI cables - several accessory boxes @@ -32,18 +32,9 @@ The `.1` case contains accessories including: The `.2` case contains the modules and other equipment: - lectern, FOH and encoder module -- office box -- minion box +- office crate +- minion crate - microphones - ethernet cables ![](img/voc-case2_0-case_b.jpeg) - -#### FOH Module -![](img/voc-case2_0-foh-front.jpeg) -![](img/voc-case2_0-foh-back.jpeg) - -#### Lectern Module -![](img/voc-case2_0-lectern-front.jpeg) -![](img/voc-case2_0-lectern-back.jpeg) - diff --git a/docs/case2.0/packing.md b/docs/case2.0/packing.md index c7a497a..558d5c1 100644 --- a/docs/case2.0/packing.md +++ b/docs/case2.0/packing.md @@ -8,16 +8,15 @@ Packing the cases shouldn't be too complicated, but a few details need special a Other than shown in previous pictures, do not place both cases with their wheels in the same direction as this will lead to a shifted center of gravity more prone to tipping. Place one case with the wheels to one side and the other to the other side -- ideally with the latches in the middle so they don't get opened accidentially. ![](img/voc-case2_0-pallets.jpeg) - ## Case x.1 Compartments (from left to right): - **Power cables**: Schuko extension cords, power strips, schuko to TRUE1, schuko to C13, cable mats -- **Accessories (back tower)**: Intercom box, ethernet box, audio and DI box -- **Accessories (front tower)**: Batteries and lucky cat box, tape box, embedder and converters box +- **Accessories (back tower)**: Intercom crate, ethernet crate, audio and DI crate +- **Accessories (front tower)**: Batteries and lucky cat crate, tape crate, embedder and converters crate - **Accessories (sorting box)**: Small adapters box -- **Camera**: Tally box, Mixer laptop box, Camera box +- **Camera**: Tally crate, Mixer laptop crate, Camera crate - **XLR Cables**: Multiple XLR cables and Headphones (in a bag) - **Video Cables**: Multiple SDI and HDMI cables @@ -43,43 +42,6 @@ There should be enough space between the legs of the tripod. ### Fitting the Power Cables It's recommended to put the rubber cable mats in the compartment first, then the long cables and the power strips on top. -### Boxes - -#### Box Camera -Place the camera in the big compartment on the bottom with the viewfinder folded down. -The small compartment can be used for the sun hood and monitor arm of the preview monitor as well as the power supplies of the monitor and camera. -![](img/voc-case2_0-crate-camera-bottom.jpeg) - -The top layer has holes for the different items. -![](img/voc-case2_0-crate-camera-top.jpeg) - -#### Box Mixer Laptop -TODO -![](img/voc-case2_0-crate-laptop-bottom.jpeg) -![](img/voc-case2_0-crate-laptop-top.jpeg) - - -#### Box Winkekatze & Batteries -Just place all items in the box in a way that the lid closes. -![](img/voc-case2_0-crate-batteries.jpg) - -#### Box Embeder & Converter -Just place all items in the box in a way that the lid closes. -![](img/voc-case2_0-crate-embedder.jpg) - - -#### Box Intercom -Remove the batteries from the headsets, place the headsets in their pouches and put everything in the box. -![](img/voc-case2_0-crate-intercom.jpg) - -#### Box Ethernet -Just place all items in the box in a way that the lid closes. -![](img/voc-case2_0-crate-network.jpg) - -#### Box Short Audio Cables & DI Boxes -Just place all items in the box in a way that the lid closes. -![](img/voc-case2_0-crate-audio.jpg) - ## Case x.2 !!! info "" @@ -89,28 +51,10 @@ Just place all items in the box in a way that the lid closes. Compartments (from left to right): - **FOH module** (bottom side to the left) -- **Supplies**: c3lingo (currently only a placeholder) box, office box, minion box, microphones box -- **Ethernet compartment**: Multiple long ethernet cables +- **Supplies**: c3lingo (currently only a placeholder) crate, office crate, minion crate, microphones crate +- **ethernet compartment**: Multiple long ethernet cables - **Lectern module** (bottom side to the left) - **Encoder module** (bottom side to the left) ![](img/voc-case2_0-case_b.jpeg) (Note that all modules have their feet on the left side to up upright when tipped!) - -### Boxes - -#### Box Office -Just place all items in the box in a way that the lid closes. -![](img/voc-case2_0-crate-office.jpg) - -#### Box Minion -Place the mini PC in the padding and add the power supply at the side. - - -#### Box Handheld Microphones + Box Headsets & Beltpacks -![](img/voc-case2_0-crate-transmitters.jpg){ align="right", width="250" } -Remove all batteries from the transmitters and place them in the batteries box. - -Place the handheld microphones into their pouches and close the lid. - -Unplug the headset microphones from the beltpacks, put the beltpacks in their pouches and place the microphones on top in a way that the lid closes. diff --git a/docs/case2.0/tips-and-tricks.md b/docs/case2.0/tips-and-tricks.md index 45e14f4..bd0e96b 100644 --- a/docs/case2.0/tips-and-tricks.md +++ b/docs/case2.0/tips-and-tricks.md @@ -40,19 +40,6 @@ In case you need to reach the additional ports (HDMI and secondary SDI) of the U - Place your hands with 4 fingers below the tray and the thumb on top ![](img/lectern-tray-stoppers_hands-comp.jpeg) - Press up next to the cable tie stopper until it goes past the I/O panel below ![](img/lectern-tray-stoppers-comp.jpeg) -### No Power -If the ATEM mini is not lit up, the main connector of the power supply may have come loose. -(All devices in the lectern module are sharing a single power supply, so nothing will work if it's not powered.) - -To reach the power supply: - -- Unplug all cables -- Open back hatch -- Unscrew the rack tray with the network switch -- Carefully slide out the tray as far as the cables allow -- Reconnect the C13 connector -- Assemble again - ## FOH Module ### Audio Mixer Setup is Funny diff --git a/docs/checklists/img/voc-cq18t-annotated.jpeg b/docs/checklists/img/voc-cq18t-annotated.jpeg deleted file mode 100644 index 4311bdc..0000000 Binary files a/docs/checklists/img/voc-cq18t-annotated.jpeg and /dev/null differ diff --git a/docs/checklists/mixer.md b/docs/checklists/mixer.md index add81f5..0e69abb 100644 --- a/docs/checklists/mixer.md +++ b/docs/checklists/mixer.md @@ -3,9 +3,3 @@ title: Video Mixer Angel --- TODO: Checklist is work in progress - -## Audio -Make sure, that the audio desk is in the following view: ![](img/voc-cq18t-annotated.jpeg) - -If something else is shown, press the "fader" soft button and then select the "talk" layer. -If pages like "input 1-8" are shown, touch the "CUSTOM" button on the top-left corner.