denm: Show warning symbol

Readme.md

@@ -132,6 +132,7 @@ Additional hardware:
 The housing is a FreeCAD model at [hardware/housing/c_its-companion-housing.FCStd](./hardware/housing/c_its-companion-housing.FCStd), but the same folder also contains finished 3mf models that can be loaded into a 3D printer slicer.
 Exports are available for:
 
+- 2mm: no battery (just display standoffs)
 - 7mm: EREMIT 654060 (6.5x40x60 mm) LiPo battery
 - 9mm: Some 9x40x60 mm LiPo battery, e.g. LP803860 (2000 mAh)
 

src/ble.rs

@@ -110,7 +110,6 @@ pub async fn run(
         CONTROLLER_SLOTS,
     >,
     name: alloc::string::String,
-    short_name: alloc::string::String,
 ) {
     let mut resources: HostResources<DefaultPacketPool, CONNECTIONS_MAX, L2CAP_CHANNELS_MAX> =
         HostResources::new();
@@ -121,7 +120,6 @@ pub async fn run(
         ..
     } = stack.build();
 
-    info!("BLE name: {name} (short: {short_name})");
     info!(
         "Starting advertising and GATT service for {}",
         crate::util::get_rx_feature_list().join(",")
@@ -134,7 +132,7 @@ pub async fn run(
 
     let _ = embassy_futures::join::join(ble_task(runner), async {
         loop {
-            match advertise(&mut peripheral, &server, &short_name).await {
+            match advertise(&mut peripheral, &server).await {
                 Ok(conn) => {
                     info!("BLE: New client connected");
 
@@ -178,19 +176,16 @@ pub fn update(payload: BleSendable) {
 async fn advertise<'values, 'server, C: Controller>(
     peripheral: &mut Peripheral<'values, C, DefaultPacketPool>,
     server: &'server Server<'values>,
-    // name in advertisement, max. 8 characters
-    short_name: &'values str,
 ) -> Result<GattConnection<'values, 'server, DefaultPacketPool>, BleHostError<C::Error>> {
-    let mut advertiser_data = [0; 31]; // 37 bytes payload - 6 byte address
+    let mut advertiser_data = [0; 35];
     let service_uuid = Uuid::from(0xc0b7_0000_d4f4_4000_ada8_f99a_02ee_315c_u128)
         .as_raw()
         .try_into()
         .unwrap();
     let len = AdStructure::encode_slice(
         &[
-            AdStructure::Flags(LE_GENERAL_DISCOVERABLE | BR_EDR_NOT_SUPPORTED), // 2+ 1 byte
+            AdStructure::Flags(LE_GENERAL_DISCOVERABLE | BR_EDR_NOT_SUPPORTED),
-            AdStructure::ServiceUuids128(&[service_uuid]),                      // 2+16 byte = 21
+            AdStructure::ServiceUuids128(&[service_uuid]),
-            AdStructure::ShortenedLocalName(short_name.as_bytes()),             // 2+ 8 byte = 31
         ],
         &mut advertiser_data[..],
     )?;
@@ -198,11 +193,7 @@ async fn advertise<'values, 'server, C: Controller>(
     let advertiser = peripheral
         .advertise(
             &trouble_host::advertise::AdvertisementParameters {
-                primary_phy: PhyKind::Le2M,
+                timeout: Some(embassy_time::Duration::from_secs(2)),
-                secondary_phy: PhyKind::Le2M,
-                timeout: Some(embassy_time::Duration::from_secs(3)),
-                interval_min: embassy_time::Duration::from_millis(150),
-                interval_max: embassy_time::Duration::from_secs(1),
                 ..Default::default()
             },
             Advertisement::ConnectableScannableUndirected {

src/main.rs

@@ -222,13 +222,12 @@ async fn main(spawner: Spawner) -> ! {
         let controller = ble::make_controller(peripherals.BT);
         let serial = &mac.as_bytes()[3..6];
         let name = alloc::format!(
-            "C-ITS ESP {:02x}:{:02x}:{:02x}",
+            "ESP32 C-ITS {:02x}{:02x}{:02x}",
             serial[0],
             serial[1],
             serial[2]
         );
-        let short_name = alloc::format!("V2X {:02x}{:02x}", serial[1], serial[2]); // max 8 chars!
+        spawner.spawn(ble::run(controller, name).expect("Failed to spawn BLE task"));
-        spawner.spawn(ble::run(controller, name, short_name).expect("Failed to spawn BLE task"));
     }
 
     // Setup GNSS: